How Much Does Paver Installation Cost in Florida?
National cost guides put paver installation at about $9 to $25 per square foot for walkways, patios and driveways. Driveways sit at the top of that range. One concrete industry guide puts brick paver pool decks at $10 to $30 per square foot. A landscaping cost guide says most homeowners spend $4,000 to $9,600 on a 400-square-foot paver patio.
Pavers cost about twice as much as plain concrete in one online cost estimator. It puts driveway pavers at $18.73 to $24.97 per square foot. A basic concrete driveway runs $9.86 to $12.11.
Pavers make sense when you want color and pattern, or sections that can be lifted and relaid later. Plain concrete makes sense when the lowest up-front cost matters most.
These are market numbers, not our price list. Superior Concrete and Construction does brick paver installation across Marion County and about 50 miles around Ocala. Your own price depends on the size, the base your ground needs and any old slab to remove. The price figures in this guide were published between December 2024 and September 2026.
What Does Paver Installation Cost per Square Foot?
Cost guides price paver jobs by the square foot, with labor and materials included. Each guide prices a slightly different job, so the ranges overlap without matching. The table lists one published range for each common project.
| Project | Price per square foot | Typical total | Kind of source (date) |
|---|---|---|---|
| Walkway | $9 to $20 | $1,430 to $3,530; about $2,480 on average | A landscaping cost guide (December 2025) |
| Patio | $10 to $24 | $4,000 to $9,600 for 400 square feet | A landscaping cost guide (December 2024) |
| Pool deck | $10 to $30 (brick pavers) | Not listed | A concrete industry guide (February 2026) |
| Driveway | $18.73 to $24.97 | Not listed | An online cost estimator (September 2026) |
The average two-car driveway in the U.S. is 16 by 40 feet, or 640 square feet. At the estimator’s rate, a paver driveway that size works out to about $12,000 to $16,000.
That rate assumes an easy site and basic pavers. It includes a gravel base, an edge border, bedding sand and polymer-modified joint sand. Sealing is not included, and neither is other extra work, like tearing out an old slab.
The paver industry’s construction spec uses pavers about 2-3/8 inches thick for walkways, patios and home driveways alike. What changes under a driveway is the base.
What Moves the Price of a Paver Job?
Base prep and compaction. The paver industry’s construction spec calls for at least 4 inches of compacted base under a patio or walkway. A home driveway needs at least 6 inches. Both numbers assume well-drained soil. About 1 inch of bedding sand is screeded on top, and the pavers are set into it.
Before any of that, the area may need grading. A landscaping cost guide puts grading for a paver walkway at 8 cents to $2 per square foot.
Tearing out an old slab. If an old concrete patio or driveway has to come out first, that is a second job. National cost guides put tear-out at about $1 to $6 per square foot, and disposal can cost extra. On a 400-square-foot patio, that adds about $400 to $2,400. Breaking out and hauling an old slab is part of our concrete removal work.
Edge restraint. Pavers need an edge that holds them in place. The paver industry’s spec calls edge restraints a key part of the pavement. A long or curved edge takes more restraint and more time to set than a short, straight one.
Cuts and patterns. Curves and borders mean more pavers cut to fit. A busy pattern takes longer to lay than a simple one, and every cut adds labor and waste.
Joint sand and sealing. Sand is swept into the joints once the pavers are set. The paver industry’s spec treats sealers and joint sand stabilizers as optional extras. Sealing adds cost, and the estimator’s driveway figure is for unsealed pavers.
Access. If a skid steer can reach the work area, it carries the base rock and pavers. A fenced backyard or a narrow side yard can mean more of that work is done by hand.
Pavers vs Concrete: Which Costs Less?
Plain poured concrete costs less up front. In one online cost estimator, driveway pavers run $18.73 to $24.97 per square foot. A basic broom-finish concrete driveway runs $9.86 to $12.11, so pavers cost about twice as much.
Pool decks follow the same pattern. The concrete industry guide puts a simple concrete pool deck design at $6 to $11 per square foot, and brick paver pool decks at $10 to $30.
The extra cost buys choices. Pavers come in more colors and patterns than a plain slab. If a spot settles or a pipe underneath needs work, those pavers can be lifted and relaid. The paver industry publishes a separate spec just on reinstating pavers.
We pour concrete driveways and concrete patios and pool decks, so we can price both options on one visit. Our concrete driveway cost guide has the full driveway comparison, including limerock. It also covers Marion County’s rules where a driveway meets a county road. Our pavers vs concrete guide compares upkeep, repairs, heat and the rules at the road.
What Florida Conditions Change the Price?
Candler sand, a soil first described in Marion County, runs 80 inches or more deep and drains fast. Loose sand like that still has to be compacted before the base goes on. The Florida Geological Survey lists poorly compacted soil after digging among the causes of ground settling. Low spots that stay wet fall outside the well-drained case, so they get a closer look.
Rain is the other local factor. Ocala averages about 52 inches of rain a year, and more than half falls from June through September. That much rain is a good reason to ask about a joint sand stabilizer. The paver spec says stabilized sand may help where joint sand keeps washing out.
We lay paver pool decks around existing pools, and a pool contractor builds the pool itself. The pool deck row in the table above is the range to start from.
In a deed-restricted community, the HOA or an architectural review committee may need to approve pavers before work starts. Their rules on color and pattern can shape the price. The Villages has its own district rules, covered on our The Villages page.
Permit rules for pavers vary between Florida cities and counties. Check with your city or county building department before work starts.
How Do You Get a Real Price for Your Pavers?
A real number starts with a look at your site. The project and the ground set the base depth. Any old slab, the pattern and the access set the rest.
Our free on-site estimate spells out the base depth, the edge restraint, the pattern and the joint sand. See how we handle brick paver installation, or call or text (352) 286-7836.