Concrete, custom homes, barns and metal buildings across Marion CountyConcrete, homes and barns in Marion County
Superior Concrete and Construction
A limerock drive running through a black gate set between block columns
Call (352) 286-7836 Get a Free Estimate

How Much Does a Gravel or Limerock Driveway Cost in Florida?

National cost guides put a gravel driveway at $1 to $10 per square foot. One guide says $4 to $10 per square foot, with materials and installation included. That comes to about $4,000 to $10,000 for a drive 10 feet wide and 100 feet long.

A second national guide says most projects cost $500 to $3,500, with an average of about $1,800. Limerock is crushed limestone, and that guide lists crushed limestone at $30 to $40 per ton.

These are market numbers, not our price list. Superior Concrete and Construction lays limerock driveways and driveway base as part of our site prep and grading work. We work across Marion County and about 50 miles around Ocala. Your price depends on the length of the drive, the depth of rock and the ground under it.

What Does a Gravel Driveway Cost per Square Foot?

Both guides price gravel driveways by the square foot, but they price different jobs. Neither one lists prices by state, so treat both as national numbers.

What the guide saysFirst guide (December 2025)Second guide (July 2026)
Price per square foot$4 to $10, installed$1 to $10
Typical project$4,000 to $10,000 for a 10 x 100 ft drive$500 to $3,500, about $1,800 on average
Rock depth5 to 6 inches at minimum, in layersA rock base of at least 4 to 6 inches
Rock for 1,000 square feetAbout 13 to 17 tons at 4 inchesAbout 25 tons at 6 inches

The rock math lines up. At 6 inches, the second guide figures 2.5 tons per 100 square feet. At 4 inches, that is about 1 ton per 60 square feet. The first guide uses the same rule of thumb.

So the gap sits in what else each guide counts. In one place, the second guide says its $1 to $10 range leaves out installation. The first guide counts labor at about half the total, and its rock prices include delivery. Site prep and the size of the job move the totals too.

How Much Does a Gravel Driveway Cost by Size?

Most residential driveways run 400 to 2,000 square feet, per the first guide. The table multiplies common sizes by each guide’s price per square foot.

DrivewaySquare feetAt $4 to $10 per square foot (first guide)At $1 to $10 per square foot (second guide)
10 x 40 ft short drive400$1,600 to $4,000$400 to $4,000
10 x 100 ft drive1,000$4,000 to $10,000$1,000 to $10,000
12 x 100 ft drive1,200$4,800 to $12,000$1,200 to $12,000
10 x 200 ft drive on acreage2,000$8,000 to $20,000$2,000 to $20,000

The second guide’s own examples sit in the lower part of its range. It puts a two-car drive of 400 to 600 square feet at $800 to $2,200. Its long rural drive of 2,000 square feet runs $3,500 to $6,000 or more. Extra-long rural drives take more gravel and more labor, per the second guide.

How Much Does Limerock or Gravel Cost per Ton?

Gravel is sold by the ton or the cubic yard. Limerock is crushed limestone, and it is the local rock here. On the state geologic map, Ocala Limestone is the surface rock across about 30 percent of Marion County.

RockPrice per tonGood to know
Crusher run$25 to $50Crushed stone, sand and stone dust; a common base layer
Crushed stone$30 to $60The most popular driveway rock
Crushed limestone (limerock)$30 to $40The local rock in Marion County
Crushed shell$40 to $80Recycled oyster and clam shells, popular in coastal areas
Pea gravel$50 to $100Round stones that shift under tires
River rock$60 to $150Less stable for driveways

The limerock row comes from the second guide. The other rows come from the first guide and include delivery. When delivery is extra, the second guide puts hauling at $100 to $500 per load, depending on distance. It also says local gravel can lower costs, while rock shipped from far away raises delivery fees.

Crushed concrete is recycled concrete broken into small pieces and used as gravel. Neither guide lists a price for it. Of the rock on this page, limerock is the one we lay.

How Much Rock Does a Gravel or Limerock Driveway Take?

Depth sets the tonnage. The first guide’s minimum is 5 to 6 inches, laid in layers. Most jobs start with a 3- to 4-inch base layer of crusher run or crushed stone. Then 2 to 3 inches of top rock go over it.

The second guide calls for a rock base of at least 4 to 6 inches. For trucks or RVs, the first guide calls for 8 to 12 inches.

DrivewaySquare feetRock at 4 inchesRock at 6 inches
10 x 40 ft400About 5 to 7 tonsAbout 10 tons
10 x 100 ft1,000About 13 to 17 tonsAbout 25 tons
12 x 100 ft1,200About 16 to 20 tonsAbout 30 tons
10 x 200 ft2,000About 26 to 34 tonsAbout 50 tons

The 4-inch column uses the first guide’s 13 to 17 tons per 1,000 square feet. The 6-inch column uses the second guide’s 2.5 tons per 100 square feet. The first guide also says to order 10 to 15 percent extra to allow for compaction and spillage.

At $30 to $40 a ton, 25 tons of limerock come to about $750 to $1,000. That covers a 1,000-square-foot drive at 6 inches, for the rock alone, before labor and any delivery charge.

What Else Moves the Price of a Gravel Driveway?

Site prep comes first. The first guide puts grading at $1 to $3 per square foot, or $1,000 to $3,000 for a 1,000-square-foot drive. The second guide says excavation or grading pros charge $1,000 to $2,500 for a driveway. Challenging terrain adds 20 to 50 percent to labor, per the first guide.

Culverts or drains carry water away from the drive, and the first guide puts them at $500 to $2,000. A layer of geotextile fabric between the soil and the base keeps the rock from sinking into the subsoil.

Edging keeps the gravel contained along the sides. The first guide puts edging or curbing at $5 to $18 per linear foot. Both sides of a 100-foot drive take 200 feet of edging, or about $1,000 to $3,600.

An old drive may have to come out first. The second guide puts tearing out an old concrete drive at about $1,300. A full replacement of a worn gravel drive runs $1,500 to $6,000. That covers removing the old gravel and laying new rock on a prepped base.

Then there is upkeep. The second guide puts regrading and fresh gravel at $100 to $400 a year. If you are weighing rock against concrete, our guide to concrete driveway costs has the concrete numbers.

Do You Need a Permit for a Limerock Driveway in Marion County?

You do if the drive connects to a county road. In unincorporated Marion County, the County Engineer’s office requires a driveway connection permit for it. For a new home, the driveway rides with the building permit, so no separate application is needed.

Driveway and right-of-way permits are filed through the County’s Civic Access portal. Unincorporated communities such as Weirsdale have no city government, so the County’s rules apply there.

The second guide says some places require permits for new gravel drives. That is most common when the work alters drainage or connects to a public road. It says permit costs vary by location, from $50 to $300, so check the County’s current fee. We plan the job around the permit and inspection schedule.

How Do You Get a Real Price for a Limerock Driveway?

A real number starts with a look at your site. The length and width of the drive set the tonnage. The ground, the drainage and the road connection set the rest.

Our free on-site estimate spells out the depth, the base and the rock for your drive. If the drive starts at a gate, we also build driveway gates and entrances. See how we lay building pads and limerock driveways, or call or text (352) 286-7836.

Frequently asked questions

How much does a gravel driveway cost in Florida?
National cost guides put a gravel driveway at $1 to $10 per square foot. One guide says $4 to $10 installed, or about $4,000 to $10,000 for a 10 by 100 foot drive. Another says most projects cost $500 to $3,500. Much of the gap is what each guide counts, such as labor and delivery.
How much does limerock cost per ton?
Limerock is crushed limestone, and a national cost guide lists it at $30 to $40 per ton. Another guide puts crusher run, a common base rock, at $25 to $50 per ton with delivery. When delivery is extra, hauling runs $100 to $500 per load.
How many tons of rock does a driveway take?
About 13 to 17 tons for a 10 by 100 foot drive at 4 inches, per one national guide. That guide's minimum depth is 5 to 6 inches, laid in layers. At 6 inches, another guide figures 2.5 tons per 100 square feet, or about 25 tons for that drive.
Is crushed concrete or pea gravel good for a driveway?
One national guide steers people away from pea gravel for the driving surface, because the round stones shift under tires. It recommends crushed stone over a base layer of crusher run. Crushed concrete is recycled concrete broken into small pieces and used as gravel. Neither guide lists a price for it.
Do I need a permit for a limerock driveway in Marion County?
Yes, if the driveway connects to a county road in unincorporated Marion County. That takes a driveway connection permit, filed through the County's Civic Access portal. For a new home, the driveway rides with the building permit, with no separate application.
How much does it cost to keep up a gravel driveway?
A national cost guide puts upkeep at $100 to $400 a year, for things like regrading and fresh gravel. The same guide puts a full replacement of a worn gravel drive at $1,500 to $6,000. That covers removing the old gravel and laying new rock on a prepped base.
Is this what Superior Concrete and Construction charges?
No. These are national market numbers from cost guides, not our price list. Your price depends on the length of the drive, the depth of rock, the ground and the road connection. Call or text (352) 286-7836 for a free on-site estimate.
Free Estimates

Get In Touch With Superior Concrete and Construction

Send a few details about the driveway, slab or building you have in mind. If you would rather talk, call or text (352) 286-7836 for a free on-site estimate.

  • (352) 286-7836
  • Ocala, FL · serving Ocala, all of Marion County and about 50 miles around, from The Villages and Leesburg to Gainesville and Inverness
  • Free on-site estimates · concrete, custom homes, barns and metal buildings

Get a Free Estimate

Tell us about the job. We come out, look at the site and give you a free on-site estimate.

Call (352) 286-7836